Light and strong (11kg) with a rubber base and polyurethane impeller in a single phase automatic contractors "Puddle Sucker" sump pump.   Thermally protected, double seal with mechanical seal in oil bath, this is the ideal 2" outlet submersible "Puddle Sucker" sump pump for use by builders and contractors.   Capable of pumping as much as 120 litres per minute and with a maximum head of 10m, this is a real workhorse.  The "Puddle Sucker" has a non-return device built into the base and will pump down to as low as 3mm on a flat surface.   We supply the pump with a 2" female BSP outlet and 10m of submersible power cable.   This pump does not have an automatic float switch.   320mm high and 190mm diameter, aluminium body and rubber base.