Adaptors/Fittings

8-16mm Worm Drive 304 Hose Clamps

8 - 16mm clamping range.   These are our Norma heavy duty W4 worm drive clamps that are manufactured completely from 304 grade stainless steel so they will not rust.   The Norma W4 range is the range of clamps that we use in the...

12-20mm Worm Drive 304 Hose Clamps

12-20mm clamping range.   These are our Norma heavy duty W4 worm drive clamps that are manufactured completely from 304 grade stainless steel so they will not rust.   The Norma W4 range is the range of clamps that we use in the field...

16-27mm Worm Drive 304 Hose Clamps

16-27mm clamping range.   These are our Norma heavy duty W4 worm drive clamps that are manufactured completely from 304 grade stainless steel so they will not rust.   The Norma W4 range is the range of clamps that we use in the field...

20-32mm Worm Drive 316 Hose Clamps

20-32mm clamping range.   These are our Norma heavy duty W5 worm drive clamps that are manufactured completely from 316 grade stainless steel so they will not rust or break.   The Norma W5 range is the range of clamps that we use in...

Shurflo Adaptor fitting 1/2" F Wingnut x 10mm (3/8) elbow hose tail

Shurflo pumps with a 1/2" male BSP inlet and outlet thread must use the "Wingnut" hose adaptor when connecting any hose to the pumps.   This is the 1/2" wingnut x 10mm or 3/8" elbow hose barb and you will normally need 2 of them.

Shurflo Adaptor fitting 1/2" F Wingnut x 10mm (3/8) hose tail

Shurflo pumps with a 1/2" male BSP inlet and outlet thread must use the "Wingnut" hose adaptor when connecting any hose to the pumps.   This is the 1/2" wingnut x 10mm or 3/8" straight hose barb and you will normally need 2 of them.

Shurflo Adaptor fitting 1/2" F Wingnut x 12mm (1/2) hose tail

Shurflo pumps with a 1/2" male BSP inlet and outlet thread must use the "Wingnut" hose adaptor when connecting any hose to the pumps.   This is the 1/2" wingnut x 12mm or 1/2" straight hose barb and you will normally need 2 of them.

Shurflo Adaptor fitting 1/2" F Wingnut x 12mm (1/2) elbow hose tail

Shurflo pumps with a 1/2" male BSP inlet and outlet thread must use the "Wingnut" hose adaptor when connecting any hose to the pumps.   This is the 1/2" wingnut x 12mm or 1/2" elbow hose barb and you will normally need 2 of them.

Shurflo Adaptor fitting 1/2" F Wingnut x 19mm or 20mm (3/4) hose tail

Shurflo pumps with a 1/2" male BSP inlet and outlet thread must use the "Wingnut" hose adaptor when connecting any hose to the pumps.   This is the 1/2" wingnut x 19mm or 3/4" straight hose barb and you will normally need 2 of them.

Shurflo Adaptor fitting 1/2" F Wingnut x 19mm (3/4) elbow hose tail

Shurflo pumps with a 1/2" male BSP inlet and outlet thread must use the "Wingnut" hose adaptor when connecting any hose to the pumps.   This is the 1/2" wingnut x 19mm or 3/4" elbow hose barb and you will normally need 2 of them.

Adaptor fittings Flojet/Jabsco PushLoc x 12mm (1/2") BSP thread Elbowed Pair

Flojet and Jabsco pumps with the "PushLoc" quad port inlet and outlet require special fittings to ensure a watertight and airtight seal.   These are the Pushloc x 1/2" elbow threaded fittings with EPDM seals and they are sold as a pair.

Adaptor fittings Flojet/Jabsco PushLoc x 12mm (1/2) hose tail straight Pair

Flojet and Jabsco pumps with the "PushLoc" inlet and outlet require special fittings to ensure a watertight and airtight seal.   These are the Pushloc x 1/2" straight barbed fittings and they are sold as a pair.

Adaptor fittings Flojet/Jabsco PushLoc x 19mm (3/4") hose tail straight Pair

Flojet and Jabsco pumps with the "PushLoc" inlet and outlet require special fittings to ensure a watertight and airtight seal.   These are the Pushloc x 3/4" straight barbed fittings and they are sold as a pair.

Adaptor fittings Flojet/Jabsco PushLoc x 19mm (3/4") hose tail elbow Pair

Flojet and Jabsco pumps with the "PushLoc" inlet and outlet require special fittings to ensure a watertight and airtight seal.   These are the Pushloc x 3/4" elbow barbed fittings and they are sold as a pair.

Adaptor fittings Flojet/Jabsco PushLoc x 12mm (1/2") hose tail elbow Pair

Flojet and Jabsco pumps with the "PushLoc" inlet and outlet require special fittings to ensure a watertight and airtight seal.   These are the Pushloc x 1/2" elbow barbed fittings and they are sold as a pair.

Adaptor fittings Flojet/Jabsco PushLoc x 12mm (1/2") BSP thread Pair

Flojet and Jabsco pumps with the "PushLoc" inlet and outlet require special fittings to ensure a watertight and airtight seal.   These are the Pushloc x 1/2" male BSP threaded fittings with EPDM seals and they are sold as a pair.