Shurflo 4248-163-E09 "Pro-Blaster II" Automatic 24v DC Pump (Santoprene/EPDM) 15.1 L/Min Max 60 psi Max
The Shurflo 4248-163-E09 (replaces the 4901-5282) is a marine grade ignition protected 24v DC automatic pressure pump with 4 diaphragms in Santoprene and the valves in EPDM which make this pump suitable for pumping fresh or salt water, dilute herbicides as well as low concentrations of most weedicide and some insecticide sprays. Supplied with a sealed pressure switch with check valve, thermal overload protection and the ability to run dry without damage, this is a very usefull 24v DC pump. The Shurflo 4248-163-E09 will lift water from 2.0m and has a maximum flow rate of 15.1 litres per minute and a maximum pressure of 60 psi. Click here for full technical specs. Standard with 1/2" male BSP threaded outlets to fit 19mm barbed fittings. Click here for adaptors. This pump is supplied with an inlet strainer and 2 x 19mm straight barbed adaptors, if you require additional adaptors, please click on the adaptors link above.