The Grundfos SBA3-45A is designed to provide an automatic flow of water from a rainwater tank or well into a house or garden, or both. Made from high quality composite and stainless steel materials, with a level switch providing protection against running dry (running out of water) and fully automatic on/off operation via the inbuilt controller, this is a terrific alternative to a surface mounted pump. The pump comes with 15m of waterproof electrical cable and 3-pin plug, all you need to do is attach some outlet hose and lower the pump into the water, plug in the power lead and your pump is ready to pump water. The Grundfos SBA3-45A operates silently in the tank and can produce a flow of 25 L/min @ 375 kPa, 40 L/min @ 320 kPa out to 70 L/min @ 200 kPa. Suitable for use in water with the water temperature between 0 and 40 degrees C. The single phase motor is 1.05 kW and operates from a standard 240v power point. This unit can be used with an AcquaSaver automatic town mains to tank water switching device if required. Click here for the spec sheet.