Current Category
Tank to Mains

	Watermark Approved Components for manual valve switching between town mains water and Grundfos Automatic Pressure Pump This is everything that your plumber will require to assemble a "Manual Town Tank Switching" unit.   The unit is installed and connected to the town mains water supply, the Grundfos pump drawing water from your tank and, the house.   When you have rainwater in your tank, the tank valve is open and the town mains valve is closed and you are operating on rainwater.   If you run out of rainwater in the tank, close the tank valve and open the town mains valve - it is that simple.   We supply this equipment as individual "Watermark Approved" components so that your licensed plumber can assemble them and install the unit to comply with all regulations.   "Back flow prevention" is carried out by the dual check valves and these also prevent town mains entering your tank and, tank water entering the mains.   For further details and a larger image, click on the "information" button to the right.		Price:

	Grundfos "Pump Genie" with CH2-30PC Rainwater & Mains System At last, the long awaited "Grundfos Pump Genie" is now available and Watermark Approved for installation on your rainwater tank system.   The "Pump Genie" provides automatic demand water flow from your rainwater tank via the Grundfos CH2-30PC15 pressure pump.   If your tank runs out of water or, if there is a blackout, the Pump Genie automatically switches to town mains water so you will never be without water.   The Pump Genie is matched to an extremely quiet Grundfos CH series automatic pump.   For additional technical details, click on the "information" button to the right.   Please note that the mains inlet pressure must be restricted to less than 600 kPa.		Price:

	Watermark Approved AcquaSaver Rainwater to Town Mains Water Diversion Valve with 25mm Pump Inlet - Fully Automatic AcquaSaver is an automatic hydraulically operated mains to rainwater changeover valve. Ideal for rainwater harvesting which switches from mains to tank whenever tank water is available and automatically defaults to mains in the event of a power or pump failure. The 1" (25mm) AcquaSaver comes with dual 1" outlets which gives the consumers flexibility to use one or both outlets, which makes AcquaSaver unique and ideal for domestic and commercial applications. The 1" (25mm) AcquaSaver comes with a 5 Year Warranty on parts and labour and Lifetime Warranty on all brass components. Features Easy to Install Full flow 1" outlets Solid Brass - Weather proof - Built to last! No regular maintenance No electrical components No standby electrical consumption Suitable for any surface and submersible pressure pump No float required on auto restarting pumps Can be mounted in any position and any distance from the pump Can be mounted directly onto the pump Certified dual check valve for backflow prevention Hydraulically operated Patented design 5 Year manufacturers Warranty Lifetime replacement Warranty on all brass components Specifications Max mains pressure 1050 Kpa Max pump Pressure 1050 Kpa Max flow rate 200+ Lpm Rainwater inlet 1" BSP F (25mm) Mains water inlet 1" BSP F (25mm) Outlets 1" BSP F (25mm) Weight 1.9 Kg Complies to AS/NZS 3500.1 when installed by a licensed plumber. To download the technical manual - click here.		Price: