Current Category
Controllers

We carry a great range of pressure switches and automatic controllers that we know to be reliable and efficient..   If you need advice or assistance with the correct controller or pressure switch selection or simply have some questions, please call us on 02-6732 6333 or email your name  and phone number to us at rod@pumpwarehouse.com.au and we will contact you.

	F30 Pressure System Controller for any Pressure Switch and Pressure Tank Pump System The Australian made "F30" switch is more than just a run of the mill paddle switch, with its integrated software the "F30" is actually a pressure system controller and it provides very real protection for any size or brand of pump against damage caused by running dry.   With an adjustable run-on time and an adjustable start time, the F30 will protect and control any above ground or submersible pump with practically zero friction loss.   We strongly recommend the installation of an "F30" Pressure Pump Controller on any pump installed with a pressure tank and pressure switch that could ever run out of water.		Price:

	Grundfos Presscontrol PC15 for single phase 240v pumps to 1.1 kW The Grundfos Presscontrol PC15 is an extremely reliable automatic controller suitable for most single phase 240v pumps  where fully automatic on/off control is required.   The controller must be wired into the motor by a licensed electrician.   The PC15 switch on point is 150 kPa so it is used on pumps where the static head above the pump is less than 15m vertical.		Price:

	Grundfos Presscontrol PC22 for single phase 240v pumps to 1.1 kW The Grundfos Presscontrol PC22 is an extremely reliable automatic controller suitable for most single phase 240v pumps  where fully automatic on/off control is required.   The controller must be wired into the motor by a licensed electrician.   The PC22 switch on point is 220 kPa so it is used on pumps where the static head above the pump is less than 22m vertical.		Price:

	WHI Controller for 240v single phase pumps to 1.1 kW and 30m static head The WHI automatic on/off controller is used on most electric pumps that are 240v and 1.1 kW or less.   The WHI has an adjustable turn ON pressure point and this adjustment is between 150 kPa and 300 kPa so, it is a terrific controller where the static head above the pump is 29m or less.   Supplied with cables that must be connected by a licensed electrician.		Price: