Current Category
Contractors Pumps

	The "Puddle Sucker" Contractors Sump Pump Manual Operation- Single Phase Light and strong (11kg) with a rubber base and polyurethane impeller in a single phase automatic contractors "Puddle Sucker" sump pump.   Thermally protected, double seal with mechanical seal in oil bath, this is the ideal 2" outlet submersible "Puddle Sucker" sump pump for use by builders and contractors.   Capable of pumping as much as 120 litres per minute and with a maximum head of 10m, this is a real workhorse.  The "Puddle Sucker" has a non-return device built into the base and will pump down to as low as 3mm on a flat surface.   We supply the pump with a 2" female BSP outlet and 10m of submersible power cable.   This pump does not have an automatic float switch.   320mm high and 190mm diameter, aluminium body and rubber base.		Price:

	Contractors Sump Pump with automatic float switch - Single Phase Light but super strong (12kg) with rubber wearplates and polyurethane impeller in a single phase automatic contractors sump pump.   Thermally protected, double seal with mechanical seal in oil bath, this is the ideal 2" outlet submersible sump pump for use by builders and contractors.   Capable of pumping as much as 250 litres per minute and with a maximum head of 10m, this is a real workhorse.   To download the technical specs, click here.		Price:

	Grundfos AP50B-50-08-A1 Automatic Submersible Vortex Pump 240v This is the submersible range of the Grundfos AP50B stainless steel "Vortex" sewage and dirty water pumps.   Initially designed for pumping domestic wastewater from toilets, these pumps are versatile enough to include grey water pumping, stormwater pumping, emptying pools or construction site trenches and even pumping out from septic pits or washdown pits.   We supply the AP50B series in single phase 240v with an automatic on/off float switch, 3-pin plug with 10m of submersible rubber cable.   The outlet size is 50mm female BSP and the motor is 0.75 kW.   This pump will pump 300 L/min @ 4.3m of head.		Price:

	Grundfos AP50B-50-11-A1 Automatic Submersible Vortex Pump 240v This is the submersible range of the Grundfos AP50B-50-11-A1 stainless steel "Vortex" sewage and dirty water pumps.   Initially designed for pumping domestic wastewater from toilets, these pumps are versatile enough to include grey water pumping, stormwater pumping, emptying pools or construction site trenches and even pumping out from septic pits or washdown pits.   We supply the AP50B series in single phase 240v with an automatic on/off float switch, 3-pin plug with 10m of submersible rubber cable.   The outlet size is 50mm female BSP and the motor is 0.75 kW.   This pump will pump 300 L/min @ 7.2m of head.		Price:

	2" Red Layflat Hose - Max 800 kPa working pressure - Per M Our Heavy Duty Red Layflat is manufactured to withstand far greater pressure than the medium and low pressure hoses.   It has excellent abrassion resistance so it can be used to transfer water, water with mud or water with some sand content and is an excellent hose for supplying water to irrigators or high pressure sprinklers.  Suitable for use with any of our "contractors" pumps.   Suits clamps 55 - 59mm.   Easily rolled up when not in use. ID:   51mm and OD 54mm.   Max Operating Pressure:  80m, 800 kPa, 120 psi.		Price:

	45 - 67mm Norma "Hi-Torque" Heavy Duty W4 All Stainless Steel Clamp - Worm Drive 45 - 67mm clamping range.   These are our Norma heavy duty "Normaclamp HD" W4 high torque worm drive clamps that are manufactured completely from 304 grade stainless steel so they will not rust.   16mmm wide band with an extended band liner so that the hose cannot extrude through the slots makes this style of clamp perfect for heavy duty hose clamping.		Price: