|
Pump Warehouse
Current Category
Sump Pumps
Sump pumps are required to pump clean water from pits, basements, cellars, drainage ponds, airconditioning pits and other drainage areas. Our range is generally stainless steel and most have fully automatic on/off functions. If you need advice or assistance with the correct pump selection or simply have some questions, please call us on 02-6732 6333 or email your name and phone number to us at rod@pumpwarehouse.com.au and we will contact you.
|
Grundfos Unilift CC5-A-1 Automatic Submersible Sump Pump
The Grundfos Unilift 5 is a strong and reliable submersible pump suitable for pumping rainwater, storm water and, grey water without stringy filaments. We supply this pump with an automatic float switch so that the pump will start and stop automatically. In the manual mode with the strainer plate removed, this pump will pump water down to a depth of 3mm. The pump is supplied with 10m of cable, a multi-size adaptor and internal check valve ready for use. We recommend 32mm flexible hose with this pump. For more detailed information, click on the "information" button to the right.
|
|
Price:
|
|
|
Grundfos Unilift CC7-A-1 Automatic Submersible Sump Pump
The Grundfos Unilift 7 is the big brother and is a strong and reliable submersible pump suitable for pumping rainwater, storm water and, grey water without stringy filaments. We supply this pump with an automatic float switch so that the pump will start and stop automatically. In the manual mode with the strainer plate removed, this pump will pump water down to a depth of 3mm. The pump is supplied with 10m of cable, a multi-size adaptor and internal check valve ready for use. We recommend 32mm flexible hose with this pump. For more detailed information, click on the "information" button to the right.
|
|
Price:
|
|
|
Grundfos Unilift KP150-A-1 Automatic Submersible Sump Pump
The Grundfos KP150-A-1 is a strong and reliable submersible pump manufactured completely in 304 stainless steel and is suitable for pumping rainwater, storm water and, grey water without stringy filaments and is capable of passing solids to 10mm in size. We supply this pump with an automatic float switch so that the pump will start and stop automatically. The pump is supplied with 5m of cable and has a 32mm female BSP outlet ready for use. We recommend 32mm flexible hose with this pump. For more detailed information, click on the "information" button to the right.
|
|
Price:
|
|
|
Grundfos Unilift KP150-A-1 Niro Automatic Submersible Sump Pump
The Grundfos KP150-A-1 Niro is a strong and reliable submersible pump manufactured completely in 304 stainless steel and is suitable for pumping rainwater, storm water and, grey water without stringy filaments and is capable of passing solids to 10mm in size. We supply this pump with a Niro style automatic float switch so that the pump will start and stop automatically. The pump is supplied with 5m of cable and has a 32mm female BSP outlet ready for use. We recommend 32mm flexible hose with this pump. For more detailed information, click on the "information" button to the right.
|
|
Price:
|
|
|
Grundfos Unilift KP250-A-1 Automatic Submersible Sump Pump
The Grundfos KP250-A-1 is a strong and reliable submersible pump manufactured completely in 304 stainless steel and is suitable for pumping rainwater, storm water and, grey water without stringy filaments and is capable of passing solids to 10mm in size. We supply this pump with an automatic float switch so that the pump will start and stop automatically. The pump is supplied with 5m of cable and has a 32mm female BSP outlet ready for use. We recommend 32mm flexible hose with this pump. For more detailed information, click on the "information" button to the right.
|
|
Price:
|
|
|
Grundfos Unilift KP250-A-1 Niro Automatic Submersible Sump Pump
The Grundfos KP250-A-1 Niro is a strong and reliable submersible pump manufactured completely in 304 stainless steel and is suitable for pumping rainwater, storm water and, grey water without stringy filaments and is capable of passing solids to 10mm in size. We supply this pump with a Niro style automatic float switch so that the pump will start and stop automatically. The pump is supplied with 5m of cable and has a 32mm female BSP outlet ready for use. We recommend 32mm flexible hose with this pump. For more detailed information, click on the "information" button to the right.
|
|
Price:
|
|
|
Grundfos Unilift KP350-A-1 Automatic Submersible Sump Pump
The Grundfos KP350-A-1 is a strong and reliable submersible pump manufactured completely in 304 stainless steel and is suitable for pumping rainwater, storm water and, grey water without stringy filaments and is capable of passing solids to 10mm in size. We supply this pump with an automatic float switch so that the pump will start and stop automatically. The pump is supplied with 5m of cable and has a 32mm female BSP outlet ready for use. We recommend 32mm flexible hose with this pump. For more detailed information, click on the "information" button to the right.
|
|
Price:
|
|
|
Grundfos Unilift KP350-A-1 Niro Automatic Submersible Sump Pump
The Grundfos KP350-A-1 Niro is a strong and reliable submersible pump manufactured completely in 304 stainless steel and is suitable for pumping rainwater, storm water and, grey water without stringy filaments and is capable of passing solids to 10mm in size. We supply this pump with a Niro style automatic float switch so that the pump will start and stop automatically. The pump is supplied with 5m of cable and has a 32mm female BSP outlet ready for use. We recommend 32mm flexible hose with this pump. For more detailed information, click on the "information" button to the right.
|
|
Price:
|
|
|
Flexible 32mm Suction & Discharge Hose for Sump Pumps
32mm Flexible black PVC suction hose to connect the tank to the inlet (suction) side of the pump. This is an excellent quality flexible hose that is UV stable, strong and able to withstand exposure to the elements. Suitable for use as a connecting hose between water tanks and between the water tank and the pump inlet. For pump to tank connections we recommend a maximum length of 20m however, if your situation requires more than this length, please give us a call so that we can make sure that everything will operate correctly. ID is 32mm and OD is 37mm with a maximum operating pressure of 600 kPa. You will also need 1 x SNT32 and 1 x 30-45/12W4 stainless steel clamp if fitting the hose to the CC5 or CC7 pumps. For the KP range of pumps, you will need 1 x SMHT32 and 1 x 30-45/12W4 stainless steel clamp.
|
|
Price:
|
|
|
32mm Male Hose Tail with Barbed End and Male Thread
This is our glass reinforced male hose tail which is used to connect flexible hose to the outlet of our Grundfos KP150, KP250 or KP350 submersible sump pumps. This item suits our 32mm flexible hose and you will require 1 for the pump end and, depending on your particular installation, another for the far end of the flexible hose.
|
|
Price:
|
|
|
32mm Nut & Tail with Female Threaded Nut and Hose Barb
This is our glass reinforced female nut & tail which is used to connect flexible hose to the outlet of our Grundfos CC5-A-1 or CC7-A-1 submersible sump pumps. This item suits our 32mm flexible hose and you will require 1 for the pump end and, depending on your particular installation, another for the far end of the flexible hose.
|
|
Price:
|
|
|
Norma 25-40mm All Stainless Steel Hose Clamp for Sump Pumps
25 - 40mm clamping range. These are our Norma heavy duty W4 worm drive clamps that are manufactured completely from 304 grade stainless steel so they will not rust. The Norma W4 range is the range of clamps that we use in the field as even our strongest staff cannot break them using a flexible driver for tightening. These are an excellent clamp for use on fuel lines, water hoses and in nearly any other clamping application. The edge of these calmps is smooth and rounded so the clamps will not cut your fingers or damage the pipe when fitted correctly. A 12mm wide smooth edged band with a clamping range of 25 - 40mm.
|
|
Price:
|
|
|
Grundfos Unilift AP12-40-04-A1 Automatic Submersible Drainage & Sump Pump
The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water. Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size. The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner. The vertical discharge port is 40mm female BSP and we strongly recommend installing 40mm ID pipe. The pipe moving the water along the ground should always be 50mm ID. A high flow fully automatic single phase submersible built to handle hard work. For technical specs, please click on the information button to the right. The pump comes complete with 10m of electrical cable and a standard 3-pin plug plus an automatic level switch.
|
|
Price:
|
|
|
Grundfos Unilift AP12-40-04-1 Manual Submersible Drainage & Sump Pump
The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water. Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size. The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner. The vertical discharge port is 40mm female BSP and we strongly recommend installing 40mm ID pipe. The pipe moving the water along the ground should always be 50mm ID. A high flow fully MANUAL single phase submersible built to handle hard work. For technical specs, please click on the information button to the right. The pump comes complete with 10m of electrical cable and a standard 3-pin plug.
|
|
Price:
|
|
|
Grundfos Unilift AP12-40-06-A1 Automatic Submersible Drainage & Sump Pump
The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water. Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size. The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner. The vertical discharge port is 40mm female BSP and we strongly recommend installing 40mm ID pipe. The pipe moving the water along the ground should always be 50mm ID. A high flow fully automatic single phase submersible built to handle hard work. For technical specs, please click on the information button to the right. The pump comes complete with 10m of electrical cable and a standard 3-pin plug plus an automatic level switch.
|
|
Price:
|
|
|
Grundfos Unilift AP12-40-06-1 Manual Submersible Drainage & Sump Pump
The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water. Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size. The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner. The vertical discharge port is 40mm female BSP and we strongly recommend installing 40mm ID pipe. The pipe moving the water along the ground should always be 50mm ID. A high flow fully MANUAL single phase submersible built to handle hard work. For technical specs, please click on the information button to the right. The pump comes complete with 10m of electrical cable and a standard 3-pin plug.
|
|
Price:
|
|
|
Grundfos Unilift AP12-40-08-A1 Automatic Submersible Drainage & Sump Pump
The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water. Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size. The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner. The vertical discharge port is 40mm female BSP and we strongly recommend installing 40mm ID pipe. The pipe moving the water along the ground should always be 50mm ID. A high flow fully automatic single phase submersible built to handle hard work. For technical specs, please click on the information button to the right. The pump comes complete with 10m of electrical cable and a standard 3-pin plug plus an automatic level switch.
|
|
Price:
|
|
|
Grundfos Unilift AP12-40-08-1 Manual Submersible Drainage & Sump Pump
The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water. Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size. The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner. The vertical discharge port is 40mm female BSP and we strongly recommend installing 40mm ID pipe. The pipe moving the water along the ground should always be 50mm ID. A high flow fully MANUAL single phase submersible built to handle hard work. For technical specs, please click on the information button to the right. The pump comes complete with 10m of electrical cable and a standard 3-pin plug.
|
|
Price:
|
|
|
Grundfos Unilift AP12-50-11-A1 Automatic Submersible Drainage & Sump Pump
The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water. Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size. The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner. The vertical discharge port is 50mm female BSP and we strongly recommend installing 50mm ID pipe. The pipe moving the water along the ground should always be 65mm ID. A high flow fully automatic single phase submersible built to handle hard work. For technical specs, please click on the information button to the right. The pump comes complete with 10m of electrical cable and a standard 3-pin plug plus an automatic level switch.
|
|
Price:
|
|
|
Grundfos Unilift AP12-50-11-1 Manual Submersible Drainage & Sump Pump
The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water. Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size. The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner. The vertical discharge port is 50mm female BSP and we strongly recommend installing 50mm ID pipe. The pipe moving the water along the ground should always be 65mm ID. A high flow fully manual single phase submersible built to handle hard work. For technical specs, please click on the information button to the right. The pump comes complete with 10m of electrical cable and a standard 3-pin plug.
|
|
Price:
|
|
|
