Home
Pump Selection
Details & Contacts
Search
View Cart
Freight

Air Diaphragm
Air Pumps
Battery Backup
Bore Pumps
Contractors Pumps
Controllers
Engine Drive
Fire Pumps
Fountain Pumps
Garden Pumps
Grey Water
Grinder Pumps
House Pumps
Hot Water
Irrigation Pumps
Jet Pumps
Macerator Pumps
Motel Pumps
Packaged Pumps
Pressure Tanks
Pump Genie
Septic Pumpout
Sewage Pumps
Solar Pumps
Sololift2
Stock Watering
Sump Pumps
Tank to Mains
Toilet Pumps
Trash Pumps
Transfer Pumps
Trench Pumpout
Variable Speed Pumps
Water Tank Pumps
12v DC Diaphragm Pumps
24v DC Diaphragm Pumps
240 AC Diaphragm
12v DC Submersible
Spray Guns

Pump Warehouse

Current Category
Trench Pumpout





Contractors Sump Pump with automatic float switch - Single Phase

Contractors Sump Pump with automatic float switch - Single Phase

Light but super strong (12kg) with rubber wearplates and polyurethane impeller in a single phase automatic contractors sump pump.   Thermally protected, double seal with mechanical seal in oil bath, this is the ideal 2" outlet submersible sump pump for use by builders and contractors.   Capable of pumping as much as 250 litres per minute and with a maximum head of 10m, this is a real workhorse.   To download the technical specs, click here.

Price:








        
Grundfos AP35B-50-06-A1 Automatic Submersible Vortex Pump 240v

Grundfos AP35B-50-06-A1 Automatic Submersible Vortex Pump 240v

This is the submersible range of the Grundfos AP35B stainless steel sewage and dirty water pumps.   Initially designed for pumping domestic wastewater from toilets, these pumps are versatile enough to include grey water pumping, stormwater pumping, emptying pools or construction site trenches and even pumping out from septic pits or washdown pits.   We supply the AP35B series in single phase 240v with an automatic on/off float switch, 3-pin plug with 10m of submersible rubber cable.   The outlet size is 50mm female BSP and the motor is 0.66 kW.

Price:








        
Grundfos AP35B-50-08-A1 Automatic Submersible Vortex Pump 240v

Grundfos AP35B-50-08-A1 Automatic Submersible Vortex Pump 240v

This is the submersible range of the Grundfos AP35B stainless steel sewage and dirty water pumps.   Initially designed for pumping domestic wastewater from toilets, these pumps are versatile enough to include grey water pumping, stormwater pumping, emptying pools or construction site trenches and even pumping out from septic pits or washdown pits.   We supply the AP35B series in single phase 240v with an automatic on/off float switch, 3-pin plug with 10m of submersible rubber cable.   The outlet size is 50mm female BSP and the motor is 0.71 kW.

Price:








        
Grundfos AP50B-50-08-A1 Automatic Submersible Vortex Pump 240v

Grundfos AP50B-50-08-A1 Automatic Submersible Vortex Pump 240v

This is the submersible range of the Grundfos AP50B stainless steel "Vortex" sewage and dirty water pumps.   Initially designed for pumping domestic wastewater from toilets, these pumps are versatile enough to include grey water pumping, stormwater pumping, emptying pools or construction site trenches and even pumping out from septic pits or washdown pits.   We supply the AP50B series in single phase 240v with an automatic on/off float switch, 3-pin plug with 10m of submersible rubber cable.   The outlet size is 50mm female BSP and the motor is 0.75 kW.   This pump will pump 300 L/min @ 4.3m of head.

Price:








        
Grundfos AP50B-50-11-A1 Automatic Submersible Vortex Pump 240v

Grundfos AP50B-50-11-A1 Automatic Submersible Vortex Pump 240v

This is the submersible range of the Grundfos AP50B-50-11-A1 stainless steel "Vortex" sewage and dirty water pumps.   Initially designed for pumping domestic wastewater from toilets, these pumps are versatile enough to include grey water pumping, stormwater pumping, emptying pools or construction site trenches and even pumping out from septic pits or washdown pits.   We supply the AP50B series in single phase 240v with an automatic on/off float switch, 3-pin plug with 10m of submersible rubber cable.   The outlet size is 50mm female BSP and the motor is 0.75 kW.   This pump will pump 300 L/min @ 7.2m of head.

Price:








        
Grundfos Unilift AP12-40-04-A1 Automatic Submersible Drainage & Sump Pump

Grundfos Unilift AP12-40-04-A1 Automatic Submersible Drainage & Sump Pump

The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water.   Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size.   The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner.   The vertical discharge port is 40mm female BSP and we strongly recommend installing 40mm ID pipe.   The pipe moving the water along the ground should always be 50mm ID.   A high flow fully automatic single phase submersible built to handle hard work.   For technical specs, please click on the information button to the right.   The pump comes complete with 10m of electrical cable and a standard 3-pin plug plus an automatic level switch.

Price:








        
Grundfos Unilift AP12-40-04-1 Manual Submersible Drainage & Sump Pump

Grundfos Unilift AP12-40-04-1 Manual Submersible Drainage & Sump Pump

The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water.   Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size.   The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner.   The vertical discharge port is 40mm female BSP and we strongly recommend installing 40mm ID pipe.   The pipe moving the water along the ground should always be 50mm ID.   A high flow fully MANUAL single phase submersible built to handle hard work.   For technical specs, please click on the information button to the right.   The pump comes complete with 10m of electrical cable and a standard 3-pin plug.

Price:








        
Grundfos Unilift AP12-40-06-A1 Automatic Submersible Drainage & Sump Pump

Grundfos Unilift AP12-40-06-A1 Automatic Submersible Drainage & Sump Pump

The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water.   Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size.   The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner.   The vertical discharge port is 40mm female BSP and we strongly recommend installing 40mm ID pipe.   The pipe moving the water along the ground should always be 50mm ID.   A high flow fully automatic single phase submersible built to handle hard work.   For technical specs, please click on the information button to the right.   The pump comes complete with 10m of electrical cable and a standard 3-pin plug plus an automatic level switch.

Price:








        
Grundfos Unilift AP12-40-06-1 Manual Submersible Drainage & Sump Pump

Grundfos Unilift AP12-40-06-1 Manual Submersible Drainage & Sump Pump

The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water.   Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size.   The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner.   The vertical discharge port is 40mm female BSP and we strongly recommend installing 40mm ID pipe.   The pipe moving the water along the ground should always be 50mm ID.   A high flow fully MANUAL single phase submersible built to handle hard work.   For technical specs, please click on the information button to the right.   The pump comes complete with 10m of electrical cable and a standard 3-pin plug.

Price:








        
Grundfos Unilift AP12-40-08-A1 Automatic Submersible Drainage & Sump Pump

Grundfos Unilift AP12-40-08-A1 Automatic Submersible Drainage & Sump Pump

The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water.   Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size.   The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner.   The vertical discharge port is 40mm female BSP and we strongly recommend installing 40mm ID pipe.   The pipe moving the water along the ground should always be 50mm ID.   A high flow fully automatic single phase submersible built to handle hard work.   For technical specs, please click on the information button to the right.   The pump comes complete with 10m of electrical cable and a standard 3-pin plug plus an automatic level switch.

Price:








        
Grundfos Unilift AP12-40-08-1 Manual Submersible Drainage & Sump Pump

Grundfos Unilift AP12-40-08-1 Manual Submersible Drainage & Sump Pump

The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water.   Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size.   The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner.   The vertical discharge port is 40mm female BSP and we strongly recommend installing 40mm ID pipe.   The pipe moving the water along the ground should always be 50mm ID.   A high flow fully MANUAL single phase submersible built to handle hard work.   For technical specs, please click on the information button to the right.   The pump comes complete with 10m of electrical cable and a standard 3-pin plug.

Price:








        
Grundfos Unilift AP12-50-11-A1 Automatic Submersible Drainage & Sump Pump

Grundfos Unilift AP12-50-11-A1 Automatic Submersible Drainage & Sump Pump

The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water.   Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size.   The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner.   The vertical discharge port is 50mm female BSP and we strongly recommend installing 50mm ID pipe.   The pipe moving the water along the ground should always be 65mm ID.   A high flow fully automatic single phase submersible built to handle hard work.   For technical specs, please click on the information button to the right.   The pump comes complete with 10m of electrical cable and a standard 3-pin plug plus an automatic level switch.

Price:








        
Grundfos Unilift AP12-50-11-1 Manual Submersible Drainage & Sump Pump

Grundfos Unilift AP12-50-11-1 Manual Submersible Drainage & Sump Pump

The Grundfos Unilift range of stainless steel submersible pumps are suitable for sump applications as well as drainage and grey water.   Pumps are fitted with a semi-open stainless steel impeller capable of passing particles to 12mm in size.   The combination of shaft and oil filled lip seal with seal faces of silicon carbide result in an extremely long operating life and make these pumps suitable for use by contractors and hire companies as well as the home owner.   The vertical discharge port is 50mm female BSP and we strongly recommend installing 50mm ID pipe.   The pipe moving the water along the ground should always be 65mm ID.   A high flow fully manual single phase submersible built to handle hard work.   For technical specs, please click on the information button to the right.   The pump comes complete with 10m of electrical cable and a standard 3-pin plug.

Price: