Home
Pump Selection
Details & Contacts
Search
View Cart
Freight

Air Diaphragm
Air Pumps
Battery Backup
Bore Pumps
Contractors Pumps
Controllers
Engine Drive
Fire Pumps
Fountain Pumps
Garden Pumps
Grey Water
Grinder Pumps
House Pumps
Hot Water
Irrigation Pumps
Jet Pumps
Macerator Pumps
Motel Pumps
Packaged Pumps
Pressure Tanks
Pump Genie
Septic Pumpout
Sewage Pumps
Solar Pumps
Sololift2
Stock Watering
Sump Pumps
Tank to Mains
Toilet Pumps
Trash Pumps
Transfer Pumps
Trench Pumpout
Variable Speed Pumps
Water Tank Pumps
12v DC Diaphragm Pumps
24v DC Diaphragm Pumps
240 AC Diaphragm
12v DC Submersible
Spray Guns

Pump Warehouse

Current Category
Water Tank Pumps


Our range of pumps suitable for pumping from water and rainwater tanks is huge.   If your tank is above or below ground, we have a pump that will work perfectly.   Even if you need a massive flow, we can accomodate you.   For advice or assistance, please phone 02-67326333 or send an email with your name and phone number to rod@pumpwarehouse.com.au and we will phone you.




Grundfos CMB 1-4 Single Phase Automatic Pressure Pump with stainless steel pump end and run-dry protection.   26 L/Min @ 250 kPa.

Grundfos CMB 1-4 Single Phase Automatic Pressure Pump with stainless steel pump end and run-dry protection. 26 L/Min @ 250 kPa.

The latest innovation from Grundfos is the CMB series of extremely efficient fully automatic pressure pumps for household and light industrial water pressure supply.   Horizontal multistage pumps that are extremely quiet, all metal parts that come in contact with water are made from stainless steel.   The PM1 automatic controller provides instant control as well as protecting the pump against running dry.   The PM1 also has a power on light and several other indicators.   The CMB1-4 version supplies a flow rate of 26 litres per minute at 250 kPa which is more than enough for 1 shower in a single level house.   This is the pump & controller only version which has a 2-year warranty plus an additional 2-years when you register your purchase with Grundfos.   One of the warranty terms is that the pump needs to be installed in a building or under a pump cover and off the ground.   Free Delivery.


Price:








        
Grundfos CMB 1-4 Single Phase Automatic Pressure Pump with stainless steel pump end and run-dry protection.   27 L/Min @ 260 kPa.

Grundfos CMB 1-4 Single Phase Automatic Pressure Pump with stainless steel pump end and run-dry protection. 27 L/Min @ 260 kPa.

The latest innovation from Grundfos is the CMB series of extremely efficient fully automatic pressure pumps for household and light industrial water pressure supply.   Horizontal multistage pumps that are extremely quiet, all metal parts that come in contact with water are made from stainless steel, carry a full 2-year warranty.   The PM1 automatic controller provides instant control as well as protecting the pump against running dry.   The PM1 also has a power on light and several other indicators.   The CMB1-4 version supplies a flow rate of 27 litres per minute at 260 kPa which is more than enough for 1 shower and a washing machine to be used at the same time in a single level house.   We supply this pump with an inlet & outlet fittings kit and pump cover.   When you buy this Grundfos pump with the fittings kit and pump cover, we will extend the warranty to 5-years plus an additional 2 years when you register your purchase with Grundfos so a total 7-year warranty.   Delivery charge applies.

Price:








        
Watermark Approved Components for manual valve switching between town mains water and Grundfos Automatic Pressure Pump

Watermark Approved Components for manual valve switching between town mains water and Grundfos Automatic Pressure Pump

This is everything that your plumber will require to assemble a "Manual Town Tank Switching" unit.   The unit is installed and connected to the town mains water supply, the Grundfos pump drawing water from your tank and, the house.   When you have rainwater in your tank, the tank valve is open and the town mains valve is closed and you are operating on rainwater.   If you run out of rainwater in the tank, close the tank valve and open the town mains valve - it is that simple.   We supply this equipment as individual "Watermark Approved" components so that your licensed plumber can assemble them and install the unit to comply with all regulations.   "Back flow prevention" is carried out by the dual check valves and these also prevent town mains entering your tank and, tank water entering the mains.   For further details and a larger image, click on the "information" button to the right.


Price: